Toggle Switches (Hide Menu, etc)
Config Toggle Switches
Explains the various toggle switch commands in the top two groups of commands under the Config Menu.
Hide Menu
Hides the Menu commands on the FCEUX main window. Pres ESC to unhide the menu.
Game Genie
Allows the use of the game genie ROM. You must have a game genie ROM named gg.rom (it is save to rename a game genie.nes file to gg.rom) and it must be in the FCEUX base directory (which is the folder fceux.exe is in unless you specified a different folder in the Directory Override Menu).
If enabled, FCEUX will open gg.rom first when you load a new game. Any codes applied in the game genie screen will be applied to the game just like on a real NES.
(Remember that enabling/disabling Game Genie emulation will not take effect until a new game is loaded)
Note: Game genie codes can also be added with the Game Genie Encoder/Decoder via the Cheat Search Menu (and does not require a game genie ROM).
PAL Emulation
Toggles between NTSC (60fps) and PAL (50fps) frame rates. By default, FCEUX will detect the proper choice when loading a ROM and set the flag accordingly.
PPU (Sub-menu)
New PPU / Old PPU
As of FCEUX 2.1.2, FCEUX has a new PPU core. The new PPU has improved accuracy and greater game compatibility than the previous PPU. However, some games may not work properly and there will be slight timing differences that would hurt movie compatibility. Therefore, FCEUX will still support the old PPU. Currently, Old PPU is the default setting.
Enable (Sub-menu)
Run in Background
If enabled, FCEUX will continue to emulate when the window is not in focus. If disabled, the emulator will pause when out of focus.
Background Input
If enabled, FCEUX can continue to receive input while not in focus. (Useful for playing 2 FCEUX's simultaneously)
Auto-savestates
Enables the Auto-save feature. If enabled, FCEUX will make periodic savestates as you play (or play/record a movie). You can right-click and select the "load last auto-save" in the context menu or press the Auto-save hotkey to back up to the last auto-save savestate.
Frame Adv. - Skip Lag
This feature, if enabled, will cause the frame advance key (see movie recording) to skip over lag frames. It does this by reading the lag counter (see display) and skipping past any frames where the input is not polled.
For instance, in a 30fps game (such as double dragon), frame advance will advance 2 frames instead of 1.
Backup Savestates
Enabled by default. This option allows for savestate & loadstate Undo (& redo). (see context menu)
Compression Savestates
Enabled by default. This option compresses non movie savestates.
Display (Sub-Menu)
Input Display
The input display will display 1-4 pictures of a NES controller at the bottom of the screen. When playing/recording a movie, these controllers will display the input that is captured in the file.
When input comes from a movie file rather than then user, it is displayed in a different color (silver)
The input display can also be toggled by hotkey/ The default key for toggling the Input display is the "," (comma) key. (This can be re-mapped in the Map Hotkeys Menu).
Lag Counter
The lag counter will increment every time to the game fails to poll for user input. It will display in red on any frame that is currently lagging and will increment the lag counter by 1. These situations occur when the game is lagging (too much information to process), or the game is in a screen transition state (so not polling for user input). In a 30fps game (such as Double Dragon 2), it will increment every other frame.
The lag counter value is stored in savestates.
Displaying the lag counter can be done by hotkey as well. It must be mapped to a hotkey in the Map Hokeys Menu.
It can be reset to 0 by mapping the reset lag counter hokey in the Map Hotkeys Menu.
Frame Counter
Toggles the display of the frame counter. The frame counter will increment once per frame.
Display BG
Turning this off will turn off the backgrounds in the game.
Display OBJ
Turning this off will turn off the objects in the game.
Note: You can set the default color when the Backgrounds are turned off. To do so, open fceux.cfg and change the value of the entry named: gNoBGFillColor
Save Config File
Saves current settings to fceux.cfg. Normally settings are not saved until FCEUX is closed.
2008
This help file has been generated by the freeware version of HelpNDoc